Ice water test naming convention
What happens if you boil sugar water?
As a sugar syrup is cooked, water boils away, the sugar concentration increases, and the temperature rises. The highest temperature that the sugar syrup reaches tells you what the syrup will be like when it cools.
What temperature is the hard crack stage?
Finally, if the candy forms hard, brittle strands that easily break, the candy is at the hard crack stage, between 300° — 310°F. Butter toffee and peanut brittle are examples of candies cooked to this temperature.
How long did the sugar mixture boil?
Preparation: In a high-sided saucepan over medium-high heat, bring cold water and sugar to a boil. Turn the heat to low and stir constantly until the sugar dissolves completely and the mixture is clear, approximately 3 to 5 minutes. Remember – the longer you boil it, the thicker the syrup will be when cooled.
Does sugar in boiling water burn more?
When sugar is added to boiling water it forms a paste that adheres to skin and intensifies burns. It is a punishment tactic commonly used in prisons, where it is described as napalm due to the way it burns.
Does sugar make boiling water hotter?
Water can’t rise above 212 degrees, the temperature at which it boils. Sugar syrup (sugar and water), though, can get much hotter because sugar melts at a much higher temperature. When we cook sugar syrup, the water starts to evaporate at 212 degrees.
How can I tell if I have a hard crack stage without a thermometer?
Skill level. To check your sugar syrup has reached the correct stage without using a sugar thermometer, place a bowl of very cold water next to the hob. Using a clean spoon, carefully take a little of the syrup and drop it into the bowl of cold water. Leave to cool for a moment then pick up the ball of syrup.
What temp is brittle stage?
|hard ball (e.g., nougat)||121 to 130 °C (250 to 266 °F)||90%|
|soft crack (e.g., salt water taffy)||132 to 143 °C (270 to 289 °F)||95%|
|hard crack (e.g., toffee)||146 to 154 °C (295 to 309 °F)||99%|
|clear liquid||160 °C (320 °F)||100%|
What temperature is a hard boil?
Sea Level: Water boils at 212 degrees F. and simmers at 190 degrees F. Tepid Water – 85 to 105 degrees F. – The water is comparable to the temperature of the human body.
How long does it take to reach hard crack stage?
Continue boiling, uncovered, not stirring the mixture but shaking the saucepan occasionally to distribute the heat as the mixture turns amber in about 9 minutes, then darker amber as it registers 305 degrees on the thermometer (hard-crack stage ), about 3 minutes longer.
What is hard ball stage?
The stage or temperature at which a small quantity of heated sugar syrup forms a hard ball when dropped into cold water. … A candy thermometer is a handy tool for determining the proper temperature, although experienced cooks can determine the hard-ball stage without one.
How long do you boil fudge to get to soft ball stage?
Boil until the mixture reaches 234°F on a candy thermometer. Stir occasionally throughout the boiling time. Note: If you do not have a candy thermometer, allow the mixture to boil to the soft-ball stage. Check after boiling for 10 minutes.